Burst-electronics SG-7 User Manual

The SG-3 and SG-7 Color Bar & Black Burst Generator (SMPTE Bars & Black Burst) With ID Option Manual Version 2.12 BURST ELECTRONICS IN

Color Bar & Black Burst Generator (SMPTE Bars & Black Burst) Introduction Congratulations on your purchase of the Burst Electronics Model S

SMPTE Color Bars, connect the Bars output to your monitor. If your monitor has a BLUE ONLY switch, set this switch to the BLUE ONLY position. If your

this brightness level. The above is based on the SMPTE recommendation for adjusting color monitors with SMPTE color bars. More detail may be found in

“WABC” or “REMOTE TRUCK 2”, or even a full color picture. The normal location of this ID would be in the upper center of the screen, although the ID c

Specifications: Input: 120Vac via wall module (12 Vdc 280mA) Output: NTSC video, 1 Vpp into 75 Ohm, may be

NOTES SG-3/7 Color Bar Generator 7

SG-3/7 Color Bar Generator 8